TECHNICAL CHARACTERISTICS OF MANUFACTORY

 Size  2448
 Amount of equipment  28
 Glazing. Productivity per month  10 000
 Tempered glass. Productivity per month  12 000
 Triplex. Productivity per month  1200

EQUIPMENT OF GLASS MANUFACTORY


 

AUTO GLASS STORE. MISTRELLO (ITALY)

32

Automatic storage of glass consists of glass loader producing sheet glass loading of any format from the racks pyramid storage for one or more tables, cutting in automatic mode. Selecting pyramid is set by production targets. Vacuum suction cups on the boot levers allow easy loading of the glass on the table. Motorized rollers allow you to transport quickly and safely the glass into the cutting zone, while ensuring complete safety of the operator.

Maximum sheet: 3210 x 6000 mm
Minimum sheet: 1500 x 2000 mm (standard)
Sheet thickness: 3-19 mm
Maximum capacity: 1000 kg


GLASS CUTTING LINE. GFPM (ITALY)

IMG_0021_

The line includes automatic glass cutting table and automatic table for straight cutting of laminated glass. This equipment is designed for cutting glass of any format, equipped with a powerful air blowing system, allows easy transporting and positioning of glass by hand. The glass sheets are cut into shapes from simple to complex curved rectangular shapes. Program for cutting optimization can reduce waste to 10%.

The maximum size of flat glass: 3210 x 6000 mm
Glass thickness 4 – 19 mm
The maximum size of laminated glass: 3210 x 4000 mm
Glass thickness: 3.3.1 – 10.10.2 mm


MULTIFUNCTIONAL CNC MACHINING CENTER. DENVER (ITALY)

IMG_0027-(1)

Multifunctional automatic center Digit Glass with five interpolated axes (X-Y-Z-A-C) for glass is the crown of Denver creation, it allows to carry out any kind of glass processing: milling, drilling and reaming holes, grinding (direct and other forms of glass), polishing on large surfaces, engraving on the surface and at the edge of the glass, cutting straight and curved cutting, polishing edge of cup circles, manufacture of bevel (straight, curved, inside).

The maximum size of details: 2350mm x 4100 mm
Maximum weight: 2500 kg


GLASS PROCESSING LINE BAVELLONI. GLASSTON (ITALY)

IMG_0152

Automatic straight and horizontal machine for bilateral edging Bavelloni is designed for double-sided edging with chamfered on flat sheets of glass, including laminated glass and mirrors.

The maximum size of the workpiece: 2400*4200 mm
Glass Thickness: 3 – 25 mm


HORIZONTAL OVEN FOR GLASS TEMPERING. UNIGLASS (FINLAND)

IMG_0119

Manufacturer of tempering glass automatic line is a Finnish company «Uniglass». It is the world leader in equipment for glass. This equipment allows you to make and use in the manufacture of glass tempered glass with minimal optical distortions and deviations from flatness. Possible hardening and thermal strengthening glass with all kinds of coatings to the recommended heat treatment, including a highly selective coating.


HEAT SOAK TEST & EVA LAMINATE OVEN

4

PUJOL oven successfully combines two technologies:
1. Testing of architectural and decorative tempered glass on the spontaneous decay by Heat Soak Test (HST) method to identify nickel sulfide inclusions that cause spontaneous breakage. This test is used in Western Europe for over 15 years and leading companies who works with external glazing currently require HST. 2. The production of architectural and decorative laminated glass (triplex) by vacuum lamination technology using films EVA. In one cycle can get up to 200 sq.m. of laminated glass.

The maximum size of glass: 2500 x 4500 mm
Operating temperature (HST): 295 ° C
Download type: horizontal / vertical
Loading Capacity: up to 40 sheets of 5 mm thick


TRIPLEX PRODUCTION LINE LAMIFLEX® (UKRAINE)

IMG_0009

The line for the production of laminated glass is designed to produce high-quality multi-layer architectural and decorative safety glass using vacuum lamination technology of EVA film. Computerized intelligent system controls heating throughout the volume of the workpiece to achieve high levels of adhesion, strength and optical characteristics. Effective management system allows to laminate glass not only already draws its standard algorithms, but also to fine-tune them for the most sophisticated solutions.

The maximum size of glass: 2600 x 4500 mm
Glass thickness: from 4 to 12 mm, the total thickness of the triplex is from 8 to 36 mm
Type of used film: EVA


AUTOMATIC LINE FOR GLAZING ASSEMBLY. BYSTRONIC (SWITZERLAND)

(1)

BYSTRONIC assembly line of glazing allows to make energy-saving products, sunscreens, highly selective, impact-resistant and bullet resistant glass. To increase the tightness of glass used automatic flexible spacers; tech filling station produces granules filling the frame of the drying agent and its seal. The above press gas filling assembly line robot performs automated assembly and filling of the glazing argon concentration of 95%, followed by pressing. Automatic sealing robot carries a secondary sealing of glass collected in continuous automatic mode, producing a seaming and sealing angles standard insulating glass for 20 – 25 seconds. Thus, the possibility of this line can produce up to 1000 sq.m. of glass per day.

The maximum size of glass: 2700 x 4000 mm.


LINE ENAMELING AND A ROLLER GLASS PAINTING GIARDINA (ITALY)

IMG_0009

Modern line enamelling and painting roller allows to provide the glass thickness micrometric adjustment applied enamel layer. The working width of the conveyor is 1.3 meters. In machine tools, among other working parts, includes several varieties of trees applicators:
– with a relief surface with different textures;
– smooth surface (for depositing thin layers).
Functional equipment allows you to work with ceramic and organic enamels, as well as with paints based on solvents or water.

The maximum size of glass: 1300 x 4200 mm
Glass thickness: 4 – 10 mm

Request a call
Ask a question
Download presentation
Request a call back

    Fill in details and our manager will contact you shortly

    Feedback